Filter
Top Products
Management Terminal Setup
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-3
5.3 MANAGEMENT TERMINAL SETUP
Use one of the following systems to access Local Management:
• An IBM or compatible PC running a VT series emulation software
package
• A Digital Equipment Corporation VT100 type terminal
• A VT type terminal running emulation programs for the Digital
Equipment Corporation VT100 series
• A remote VT100 type terminal via a modem connection
• In-band via a Telnet connection
5.3.1 Console Cable Connection
Use the Console Cable Kit provided with the 6C105 chassis to attach the
management terminal to the COM port as shown in Figure 5-1.
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the 6E12X-26 and 6E13X-25 as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 6E12X-26 and 6E13X-25.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the PC communications port.
Figure 5-1 Management Terminal Connection
1
2345
PS1
PS2
12
1413
25
26
COM
CPU
34
56
78
910
1112
1516
1718
1920
2122
2324
6E122-26
Ethernet
Reserved for FEPIM
Reserved for FEPIM
12
COM
CPU
34
6E122-26
Ethernet
RJ45 COM Port
RJ45-to-DB9
PC Adapter
UTP Cable
With RJ45 Connectors
PC