Filter
Top Products
Troubleshooting Checklist
Troubleshooting 4-9
Table 4-6 Management System Troubleshooting
Possible Causes Instruction
Improper Community
Names Table.
1. Refer to the Local Management User’s Guide for Community
Names Table setup.
2. If the Community Names have been forgotten, refer to
Section B.1 for instructions on clearing NVRAM.
The module does not
have an IP address.
1. Refer to your Local Management User’s Guide for IP address
assignment procedure.
2. If the module is using the IP address of the 6C105 chassis,
ensure it is not in STANDALONE management mode. Your
Local Management User’s Guide provides instructions on
setting the management mode.
The applicable front
panel port is disabled.
1. Enable port. Refer to the Local Management User’s Guide for
instructions on enabling/disabling ports.
2. Port may disabled due to Spanning Tree. Review network design
and delete unnecessary loops.