Cabletron Systems 924TXG Switch User Manual


 
12
Return to Default Configuration
The Return to Default Configuration screen allows you to restore the original factory default switch settings before
changes were made via the user interface or SNMP.
To return to default configuration settings, do the following:
1. Select h from the Main Menu to view the Return to Default Configuration screen. The following message prompt
displays:
2. Select a to confirm the process; select x or z to cancel the process.
Logout
The Logout menu item allows you to log out of the Telnet interface and return to the Login screen. Select i from the
Main Menu to logout. After this command is entered, the system logout occurs automatically. Note: this menu item is
only seen from within a Telnet session.
Reset
The Reset screen allows you to perform a switch hardware reset. You are first prompted as to whether or not to save
the current switch configuration.
To reset the switch, do the following:
1. Select j from the Main Menu to view the Reset screen. The following message prompt displays:
2. Select a or b to confirm the process; select x or z to cancel the process.
Switch will return to default settings.
All the current changes and settings will be lost!
a. OK
x. Cancel and return to the Previous Menu
z. Cancel and return to the Top-Level Menu
Enter Selection:
Switch will go through a hardware reset.
All the current changes that have not been saved
will be lost!
a. Save changes and Reset
b. Don’t save changes and Reset
x. Cancel and return to the Previous Menu
z. Cancel and return to the Top-Level Menu
Enter Selection: