Filter
Top Products
CHAPTER 2:
INSTALLATION
Page 2-2
BRIM-F6 User’s Guide
2.2 Installing the FPIMs
To install an FPIM into the BRIM-F6:
1. Remove the screws securing the FPIM coverplate and the coverplate.
See Figure 2-1.
2. Insert the connector pins of the FPIM into the connector on the
BRIM-F6. See Figure 2-2.
Figure 2-1. Removing the FPIM Coverplate
3. Press down firmly on the FPIM until the pins slide all the way into the
connector holes.
4. Secure the FPIM with the screws provided.
BRIM-F6
XMTPWR RCV STS
FPIM A
WRPLNK TWR LNK
RESERVED FOR FPIM
FPIM B
RESERVED FOR FPIM
BRIM-F6
XMTPWR RCV STS
FPIM A
WRPLNK TWR LNK
FPIM B
RESERVED FOR FPIM
RESERVED FOR FPIM
FPIM Screws
FPIM Coverplate
BRIM-F Book Page 2 Monday, January 29, 1996 9:26 AM