Cabletron Systems 5000, 5500 Switch User Manual


 
Device ConÞguration View
ConÞguration Views Cisco Catalyst 5000/5500 Hub
3-2 Management Module Guide
Number of Interfaces
Displays the number of ports for the device.
Router Redundancy
This button allows you to enable (true), or disable (false) redundancy for this
interface. By default it is set to be true.
This button accesses the IF Address Translation Table. This table cross-
references device IP addresses to device MAC (Ethernet) addresses for
selected nodes between networks. Double-click a column entry to open an
address-speciÞc Address Translation Table Information view, which allows
you to alter the index or addresses.
This button allows you to update the Device ConÞguration view to reßect any
changes that have been made to the devices in the chassis.
Interface ConÞguration Table
This table within the Device ConÞguration view provides the following
conÞguration information for the device and each port:
Index
Displays the interface or port number.
Description
Provides a description of the interface or port.
Type
Displays the type of hardware interface or port. Some of the possible types are
Ethernet, FDDI, T1, PPP, and Reg1822.
Bandwidth
Displays the estimated bandwidth of the interface measured in bits per
second. For interfaces that do not vary in bandwidth, or for which no accurate
estimate can be made, a nominal bandwidth is provided
Physical Address
Displays the physical (MAC) address of the interface or port.
Operation Status
Displays the current operational state of this interface or port (Up, Down, or
Testing).
Admin. Status
Displays the administrative status for this interface. Possible states are: On,
Off, and Testing.
IF Address Translation
ReconÞgure