Filter
Top Products
Chapter 4: Installation
4-8 CSX200 Installation Guide
Materials Required
The following parts are included in the CSX200-ACCY-KIT.
• Strain-relief bracket (shown in Figure 4-6, on the following page)
• Left and right rackmount brackets (shown in Figure 4-7, on the following page)
• 8-32 x 1/4-inch, pan-head screws (4)
• 8-32 x 3/8-inch, pan-head screws (4)
Figure 4-5 CSX200 Rackmount Hardware
Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the CSX200 as follows:
• Locate the strain-relief bracket and four 8-32 x 3/8-inch, pan-head screws provided in the
CSX200-ACCY-KIT.
• Using the four 8-32 x 3/8-inch, pan-head screws, attach the strain-relief bracket to the bottom
of the CSX200 as shown in Figure 4-6, on the following page.
!
CAUTION
Do not use any screws other than those supplied with the CSX200-ACCY-KIT to perform
the following procedures.
Rackmount
Brackets (2)
2012_12
Strain-Relief Bracket