Filter
Top Products
CSX200 Installation Guide C-1
C
FCC Part 68 - User’s Information for CSX200
The following instructions are to ensure compliance with the Federal Communications
Commission (FCC) Rules, Part 68:
1. All connections to the WPIM-T1, WPIM-DI and WPIM-DDS must be made using standard
plugs and jacks.
2. Before connecting your unit, you must inform the local telephone company of the following
information:
Table C-1 WPIM-DI and WPIM-T1
Table C-2 WPIM-DDS (Only)
3. If the unit appears to be malfunctioning, it should be disconnected from the telephone lines until
you learn if your equipment or the telephone line is the source of the trouble. If your equipment
needs repair, it should not be reconnected until it is repaired.
4. The CSU/DSU has been designed to prevent harm to the T1 and DDS network. If the telephone
company finds that the equipment is exceeding tolerable parameters, the telephone company
can temporarily disconnect service, although they will attempt to give advance notice if
possible.
5. Under the FCC Rules, no customer is authorized to repair this equipment. This restriction
applies regardless of whether the equipment is in or out of warranty.
Port ID REN/SOC FIC USOC
WPIM-DI
WPIM-T1
6.0N
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
04DU9-1ZN
RJ48C
RJ48X
Port ID REN/SOC FIC USOC
WPIM-DDS 6.0N
04DU5-56
04DU5-64
RJ48S