Filter
Top Products
Installing Fast Ethernet (Port) Interface Modules
DELHE-UA User’s Guide 2-3
Figure 2-1 Removing the FEPIM Coverplate
2. Refer to Figure 2-2. Gently pull the faceplate of the DELHE-UA
forward to allow room for the FEPIM to be aligned over the connector.
3. Align the FEPIM connector into the DELHE-UA connector pins. See
Figure 2-2.
!
Before installing a DELFX-UI or DELF3-UI module into the host
module, remove the protective cover on the SC connector.
!
Ensure that the FEPIM connector aligns with the DELHE-UA
connector pins to prevent bending the pins. This can damage
both the DELHE-UA and the FEPIM.
coverplate_remove
FEPIM
Coverplate
Standoff Screws
DELHE-UA
FEPIM 2
SP
FEPIM 1