Filter
Top Products
Chapter 2: Installation
2-8 DELHE-UA User’s Guide
9. Secure the DELHE-UA to the module faceplate using the mounting
screws saved in Step 5.
10. Secure the DELHE-UA to the module standoffs using the standoff
screws included in the DELHE-UA shipping materials.
11. Reinstall the interface module in the chassis.
12. Reattach the network cabling to the interface module.
2.4 CONNECTING TO THE NETWORK
The DELHE-UA can be connected to the network using either fiber optic
cable or twisted pair cable. The media chosen determines which type of
FEPIM to be used. When using fiber optic cable, use either the
DELFX-UI or the DELF3-UI. The DELFX-UI is used for multimode
fiber cable, and the DELF3-UI is used for single mode fiber cable. Refer
to Appendix B for details on which FEPIM to use with the appropriate
fiber optic cable. To connect to the network using fiber optic cable, refer
to Section 2.4.1. When using twisted pair cabling, use the DELTX-UI. To
connect to the network using twisted pair cable, refer to Section 2.4.2.