Filter
Top Products
Chapter 5: Local Management
5-88 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
4. Press ENTER. The message “SAVED OK” is displayed.
5.26.2 Setting the Reset Peak Switch
To set the Reset Peak Switch field to YES or NO, proceed as follows:
1. Use the arrow keys to highlight the Reset Peak field for the selected
port.
2. Press the SPACE bar to select YES or 3NO.
3. Use the arrows keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message “SAVED OK” is displayed.
5.27 MODULE STATISTICS MENU SCREEN
The Module Statistics Menu screen, Figure 5-32, provides access to
screens that allow the user to obtain switch statistics about frame traffic
through each interface, to view MIB-II statistics from each interface, and
to view RMON Statistics gathered by the RMON agent embedded in the
DLE2X-MA and DLE3X-MA.
Access the Module Statistics Menu from the Module Menu screen by
using the arrow keys to highlight the MODULE STATISTICS menu
item and pressing ENTER. The Module Statistics Menu screen displays.