Filter
Top Products
Appendix B: DELTX-UI, DELFX-UI and DELF3-UI Specifications
B-2 DLE28-MA, DLE38-MA, DLE29-MA and DLE39-MA User’s Guide
B.2 DELFX-UI
The DELFX-UI shown in uses an SC style connector that supports
multimode fiber optic cabling. Specifications for the DELFX-UI are listed
below.
Figure B-2 DELFX-UI
Table B-1 Transmitter Power
Cable Type Worst Case Budget Typical Budget
50/125 µm fiber 6.0 dB 9.0 dB
62.5/125 µm fiber 9.0 dB 12.0 dB
100/140 µm fiber 15.0 dB 18.0 dB
The transmitter power levels and receive sensitivity levels
listed are peak power levels after optical overshoot. A peak
power meter must be used to correctly compare the values
given above to those measured on any particular port. If power
levels are being measured with an average power meter, add 3
dB to the measurement to compare the measured values to the
values listed above.
26
25
LKG-10786-98F
DELFX-UI