Filter
Top Products
EMC39-12 User’s Guide Page 2-1
CHAPTER 2
INSTALLATION
This chapter explains how to install the EMC39-12 in a 19-inch rack and
also provides requirements for installing the EMC39-12 on a tabletop or
shelf.
2.1 UNPACKING THE EMC39-12
Unpack the EMC39-12 as follows:
1. Remove the shipping box material covering the EMC39-12.
2. Carefully remove the EMC39-12 from the shipping box.
3. Remove the EMC39-12 from its non-conductive bag. If you notice any
signs of damage, contact Cabletron Systems Technical Support
immediately.
2.2 INSTALLING THE EMC39-12
You can install the EMC39-12 in a 19-inch rack or place it on any
horizontal surface (e.g. a table or shelf). Cabletron Systems provides an
accessory kit with the EMC39-12 that includes Rackmount Brackets and
Mounting Screws.
The following sections provide instructions for installing the EMC39-12.
Select one of the following subsections and perform the steps that are
applicable to your installation needs.
!
CAUTION
Do not remove the cover from the EMC39-12. There are no
user configurable devices inside and the electronics are static
sensitive.
emc39bk Page 1 Monday, February 12, 1996 4:21 PM