Filter
Top Products
Cabletron Ethernet Hub Alarms and Events
Event and Alarm Messages Cabletron Ethernet Hubs
7-2 Management Module Guide
Cabletron Ethernet Hub Alarms and Events
Table 7-1 lists the events and alarms supported by the Cabletron Ethernet
Hub devices. The event message files are located in the following directory:
/SPECTRUM Directory Path/SG-Support/CsEvFormat
The alarm message files are located in the following directory:
/SPECTRUM Directory Path/SG-Support/CsPCause
Table 7-1. Events and Alarms
Event Message Probable Cause Message
00010203
The model created is not the
same type as the device. Model
type = {v}, Name = {v}, User =
{v}.
00010203
The model created is not the
same type as the device.
00010306
A(n) {v} device, named {v}, has
been cold started.
00010306
Not Applicable.
00010307
The device named {v} has been
warm started.
00010307
Not Applicable.
00010308
A(n) {v} device, named {v}, has
detected a commumication Link
Down.
00010308
Communication link is down.
00010309
A(n) {v} device, named {v}, has
detected a communication link
up.
00010309
Not Applicable.
0001030a
The device named {v} has
detected an authentication
failure.
0001030a
Other user is trying to connect
to device with an invalid
community string.
0001030b
A(n) {v} device, named {v}, has
detected an EGP Neighbor or
loss.
0001030b
Lost contact with EGP neighbor.