Filter
Top Products
Installing the HSIM-FE6
HSIM-FE6 User’s Guide 2-7
Figure 2-4 Installing the HSIM-FE6
7. Align the connector on the HSIM-FE6 with the connector on the
module.
8. Press down firmly on the connector area of the HSIM-FE6 until the
connector slides all the way onto the pins. Ensure that the standoffs on
the interface module align with the standoff screw holes on the
HSIM-FE6.
!
CAUTION
Ensure that the HSIM-FE6 connector aligns with the module
connector pins to prevent bending the pins. This can damage
both the HSIM-FE6 and the module.
Faceplate Mounting Screws
mounting
Standoffs
HSIM
Connector
HSIM-FE6
Standoff Screws
Connector
(top view)
Cutaway view of connector
Connector
HSIM-FE6
FEPIM 1
FEPIM 2
SP
Host Platform