Cabletron Systems VHSIM-G02 Network Card User Manual


 
Document Conventions
VHSIM-G02 User’s Guide 1-3
1.2.2 Connectivity
The VHSIM-G02 supports two modes of operation for the Gigabit
interfaces. In one mode, the VHSIM-G02 supports one active and one
redundant Gigabit Ethernet twisted pair port. In the other mode, both of
the interfaces can be active at the same time, if the host platform has 16 or
less fixed front panel ports.
The VHSIM-G02 supports Gigabit Ethernet connections on the RJ45
ports using twisted pair. The VHSIM-G02 module supports the
IEEE 802.3ab Gigabit specification and the IEEE 802.3x specification for
flow control and auto-negotiation. The VHSIM-G02 operates in full
duplex mode.
1.3 DOCUMENT CONVENTIONS
The following conventions are used throughout this document:
1.4 RELATED DOCUMENTATION
The documentation for the host platform in which the VHSIM-G02 is to
be installed, whether standalone device or module, provides additional
information about the setup of the VHSIM-G02. This user’s guide
references procedures in these documents, where appropriate, but does
not repeat them.
Documents can be obtained on the World Wide Web in Adobe Acrobat
Portable Document Format (PDF) at the following site:
http://www.cabletron.com/
NOTE
Note
symbol. Calls the reader’s attention to any item of
information that may be of special importance.
!
CAUTION
Caution
symbol. Contains information essential to avoid
damage to the equipment.
Electrical Hazard Warning
symbol. Warns against an action
that could result in personal injury or death due to an electrical
hazard.