Filter
Top Products
Chapter 2: Installation
2-4 VHSIM-G02 User’s Guide
6. Refer to Figure 2-2 and position the VHSIM-G02 behind the module
faceplate, above the connectors.
Figure 2-2 Installing the VHSIM-G02 in the Host Platform
7. Align the VHSIM-G02 connectors with the VHSIM connectors on the
module.
!
CAUTION
When installing the VHSIM-G02, ensure that the pins on the
module align with the connector to prevent bending the pins.
Damage to both the VHSIM-G02 and the module can result if
they are not properly aligned.
Faceplate Mounting Screws
25491_36
Standoff
Connectors
VHSIM-G02
Standoff Screws
Connectors
(top view)
Standoff
Connectors
Cutaway view of connectors
Host Platform
VHSIM-G02
1
2
SP