Filter
Top Products
COM300 Voice Communication Modem
6
are listed on its label. Additional technical information from the FCC and IC
on the COM300 is available in Appendix D and E, respectively.
If any of your telephone equipment is not operating properly, you should
remove it immediately from your telephone line, as it may cause harm to the
telephone network. If the telephone company notes a problem, they may
temporarily discontinue service. When practical, they will notify you in
advance of this disconnection. If advance notice is not feasible, you will be
notified as soon as possible. When you are notified, you will be given the
opportunity to correct the problem and informed of your right to file a
complaint with the FCC.
3.5 Repairs
To comply with FCC Rules and Regulations, all repairs on the COM300 must
be performed by Campbell Scientific, Inc. or an authorized agent of Campbell
Scientific, Inc.
4. LoggerTalk Software Installation
LoggerTalk Voice Programming software is provided with the COM300. This
software is used to edit datalogger program files (*.DLD) to include code that
activates voice communication in voice capable dataloggers.
LoggerTalk requires a computer running Windows 95, Windows NT, or
Windows 98 with a 3.5" floppy drive. Before beginning installation, close all
active programs including virus and mail applications. To install LoggerTalk,
insert disk 1 into your floppy drive. From the Windows Start Menu, choose
Run. In the dialog box that appears, type in A:\Setup (this assumes A: is the
drive letter assigned to your floppy drive). The installation program will guide
you through the remainder of the setup.
If an error occurs at the beginning of installation, check your
Windows temp directory. (This is typically C:\Temp or
C:\Windows\Temp. If you are unsure, go to an MS-DOS prompt
and type SET. Look for a line that displays TEMP = and note
the directory name.) Move all files to a different directory. This
directory is used during software installation. The TEMP
directory has a file limit that, if close to being exceeded, will
prevent installation of the software.
Operation of LoggerTalk is not covered in this manual. LoggerTalk has an
extensive help system that can be accessed at any time by pressing the F1 key,
or by selecting the Help menu item from the main window and by pressing the
Help button on screens that have it. Two tutorials are included: a basic tutorial
that walks you through creating voice strings, downloading the modified
program to the datalogger, and navigating through the voice modem menus, and
a more advanced tutorial for setting up voice callback. Example program files
are included for use in the tutorials. If you do not have prior experience in
editing datalogger program files with a Campbell Scientific editor, we suggest
that you begin with the basic tutorial and peruse the help system for any
questions you might have.
NOTE