Filter
Top Products
Protocol Settings
3-3
3
Using a TCP/IP Network
Protocol Settings
This section describes how to specify the protocol settings for the machine using
the control panel. If you are configuring the settings for the first time, use the control
panel of the machine.
After configuring the settings, you can change the content by using software other
than the control panel of the machine. For details, see "Network Setting Items," on
p. 8-2.
IMPORTANT
When using functions to access external servers on the internet, you may not be able to
access them due to the settings of firewalls, etc. In this case, consult your network
administrator.
TCP/IP Settings
The following are the procedures for specifying the TCP/IP settings from the control
panel. After configuring the TCP/IP settings, confirm that the network connections
are properly set. (See "Confirming TCP/IP Settings," on p. 3-14.)
1
On the TCP/IP Settings screen, press [IP Address Settings] ➞
specify the following.