Canon 2545I All in One Printer User Manual


 
xix
Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. See “Provide Adequate
Installation Space,” on p. 1-5 for specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used. If the optional
Super G3 multi-line FAX Board is installed, a multi telephone line
(touch-tone or rotary) can be used.
2. Order an RJ11-C telephone wall jack (USOC), which should be installed by
the telephone company. If the RJ11-C wall jack is not present, telephone/
facsimile operation is not possible.
3. Order a normal business line from your telephone company's business
representative. The line should be a regular voice grade line or an
equivalent one. Use one line per unit. If the optional Super G3 multi-line
FAX Board is installed, you can use a multi-line.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, i.e., 2500
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX
(Private Branch eXchange) unit without “Call Waiting” can be used with your facsimile
unit. Key telephone systems are not recommended because they send nonstandard
signals to individual telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded
outlet only.
Do not connect this machine to an outlet or power line shared with other appliances
that cause “electrical noise.” Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise that often interferes with
communications equipment and the sending and receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the rear panel of this equipment is a label that contains,
among other information, a product identifier in the format of US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.