Filter
Top Products
23
Documents
Types of Document You Can Scan
The scanner can scan documents that satisfy the following conditions.
Type of paper: Plain paper
Width: 2" to 8.5" (50.8 mm to 216 mm)
Length: 2.75" to 14.02" (70 mm to 356 mm)
Thickness: 14 to 32 lb bond (52 g/m
2
to 128 g/m
2
) 0.0024" to 0.0059"
(0.06 mm to 0.15 mm)
IMPORTANT
• When scanning multiple documents of different sizes at the same
time, load the documents so that they cover the entire span of the
feed rollers.
• When a document exceeds the length of A4/LTR, we recommend
feeding one page at a time.
• Scanning documents before the ink on them is dry will make the
rollers and scanning glass dirty, causing streaks to appear on the
image and other documents to become dirty. Make sure that
documents are dry before scanning.
• Scanning documents that are written in pencil or a similar writing
instrument will make the rollers and scanning glass dirty, causing
streaks to appear on the image and other documents to become
dirty. Always clean the internal parts of the scanner after scanning
such documents.
• When scanning a two-sided document printed on thin paper, the
image on the opposite side of each page may show through. Adjust
the scanning intensity in the application software before scanning
the document.
• We recommend feeding thin paper one page at a time.
• Scanning the following documents may cause a paper jam or
malfunction. To scan such a document, use a copy machine to
make a photocopy of the document and then scan the photocopy.
There are creases
or fold lines.
Carbon paper
There are curls. The surface is coated.
There are tears. Extremely thin document,
such as semi-transparent thin
paper
There are clips or
staples.
Documents with binder holes
(Excluding documents with 2,
3, or 4 holes of a diameter of
0.315" (8 mm) or less)