Filter
Top Products
40
5
Specify the output method.
6
Configure the settings related to output, and then click
the output button to output the scanned images.
The name of the output button differs depending on the selected
output method. For example, when [Save to folder] is specified as
the output method, the output button becomes [Save].
When output is finished, the complete screen appears. Scan First
is now finished.
Hint
• Clicking [Return to main screen] returns to the main screen of
Scan First.
• When [Save to folder] is selected as the output method, you can
click [Open storage folder] to open the folder in which the
scanned images were saved.
Starting Scan First with the Start Button
Scan First is assigned to the Start button of the scanner by default.
If you load the document in the scanner and press the Start button,
CaptureOnTouch starts and Scan First starts. When scanning of the
document is finished, the output method selection screen appears.
You can then output the scanned images using the same procedure
as that described from Step 5 on 40 page.
Output button
A5
A5
B5
A4
LTR
B5
A4
LTR
Start Button