Filter
Top Products
1-3
Unpacking
1
SETTING UP
Removing the shipping materials ______________
Remove the shipping materials as shown below.
1
Remove the shipping tapes from the top
of the fax.
2
Remove the protective piece from the
multi-purpose tray.
3
Open the operation panel partially by
gently pulling it towards you (it only
opens slightly).
4
Remove the protective sheet from the
Automatic Document Feeder (ADF).
Close the operation panel by pressing it
down from the centre until it locks into
place.
5
Open the printer cover using the printer
cover tab. (see p. 2-2)
6
Remove the shipping tape from the side
of the fax.
Close the printer cover.
The actual shipping materials may differ in shape, quantity, and position from the ones shown above.