Filter
Top Products
Chapter 8 Receiving Faxes 8-3
Receiving Faxes
Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your machine to automatically switch between fax and voice calls.
Setting Fax/Tel Mode
Your machine is factory-set to Fax/Tel Mode. If you have not changed the receive
mode to FAX ONLY MODE or DRPD, simply follow this procedure:
1 Press Receive Mode repeatedly until
Fax/Tel Mode is displayed.
• After a few seconds, the LCD changes
to this display:
If Fax/Tel Mode does not appear in the LCD when you press Receive Mode, follow
this procedure to set FAX/TEL AUTO SW (Fax/Tel Mode):
1 Open the one-touch speed dialing panel.
2 Press Data Registration.
3 Press Set.
4 Use ∂ or ¨ to select RX SETTINGS.
5 Press Set.
6 Use ∂ or ¨ to select RX MODE.
7 Press Set.
8 Use ∂ or ¨ to select FAX/TEL AUTO SW.
9 Press Set.
•To set the options for FAX/TEL AUTO SW
(Fax/Tel Mode), see the following pages.
10 Press Stop to return to standby mode.
11 Confirm that FaxTel is displayed in the LCD.
• If FaxTel is not displayed, press Receive Mode
repeatedly until Fax/Tel Mode is displayed. After a
few seconds, the LCD returns to standby mode.
12/27 FaxTel
12/27 FaxTel
RING START TIME
FAX/TEL AUTO SW
FAX ONLY MODE
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION
12/27 FaxTel
Fax/Tel Mode