Filter
Top Products
Chapter 2 Setting Up 2-7
Setting Up
Attaching the Handset to Your Machine
Follow this procedure to attach the handset to your machine:
1
Remove the screws
from the plugs and
insert the plugs into
the holes on the
handset cradle.
3
Use your finger to push
the screws into the
plugs.
• If you have difficulty,
use a cross-point
screwdriver to
push
the screws all the way
into the plugs. (Do not
screw them in as the
screws may break.)
• Make sure you
support the machine
when inserting the
screws.
2
Insert the plugs (with
the handset cradle)
into the holes on the
machine.
• If you have difficulty
inserting the plugs,
turn the machine so
that the left side is
facing you and the
right side is against
a wall. You can now
insert the plugs
without the machine
moving.
4
Place the handset in
its cradle and connect
the handset cord to
the h jack(1 p. 2-8).