Filter
Top Products
List of Error Messages
3-7
Troubleshooting
3
# 037
Cause Documents could not be received because there was insufficient memory available.
Remedy Erase unwanted documents and documents with errors from memory in order to increase the
amount of available memory. (See "Introduction to the Mail Box Functions," in the Copying
and Mail Box Guide, or "Receiving Documents," in the Sending and Facsimile Guide.)
# 099
Cause Copying/printing was interrupted.
Remedy Try copying/printing again.
# 701
Cause The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on the control
panel, and try again.
# 703
Cause The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after other send jobs are complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate normally, turn the
main power OFF, and then back ON again.
# 711
Cause The inbox memory is full.
Remedy Erase the unnecessary documents stored in the inbox.