Canon LV-7255 Projector User Manual


 
40
5. Using On-Screen Menu
NOTE: When “sRGB”, “Standard”, “Video” or “Cinema” is selected, the brightness decreases slightly when compared to “Presen-
tation”. This is not a malfunction.
User Adjust (when using User)
When selecting user adjustable presetting (User), the submenu will be displayed.
You can customize each gamma or color. To do so, first select “User” and press the OK button, and then proceed the
following steps.
Selecting Base Setting [Base setting]
This feature allows you to use white balance or gamma values as reference data to optimize for various types of
images. You can select one of the following five settings.
• Standard • Video
• Presentation • sRGB
• Cinema
Selecting Gamma Mode [Gamma]
Each mode is recommended for :
Black detail ............ Emphasizes detail in dark areas of the picture
Dynamic ................ Creates a high-contrast picture
Natural .................. Natural reproduction of the picture
Adjusting White Balance [Brightness RGB/Contrast RGB]
This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the
screen; Contrast for each color (RGB) to adjust the white level of the screen.
Adjusting Brightness, Contrast, Sharpness, Color and Color balance
Brightness ............. Adjusts the brightness level.
Contrast ................ Adjusts the intensity of the image according to the incoming signal.
Sharpness ............. Controls the detail of the image for Video.
Color ..................... Increases or decreases the color saturation level (not valid for RGB).
Color balance ........ Varies the color level from +/– green to +/– blue. The red level is used as reference. This adjustment is only
valid for Video and Component inputs (not valid for RGB).