44
5. Using On-Screen Menu
¶ Menu Descriptions & Functions [Advanced settings]
Enabling Password [Password]
This feature turns on or off the Password function.
Unless the correct password is entered, the projector cannot project an image. (→ page 32)
Disabling the Key lock [Key lock]
This option turns on or off the Key lock function.
NOTE:
• This Key lock does not affect the remote control and the PC control functions.
• When the Key Lock is Off, pressing and holding the BACK button for about 10 seconds will change the setting to enable.
• Key symbol indicates the Key lock is On.
Enabling High Speed Fan Mode [Fan mode]
This option allows you to select two modes for fan speed: High speed mode and Auto mode.
High ...................... The built-in fans run at a fixed high speed.
Auto ...................... The built-in fans automatically run at a variable speed according to the internal temperature.
When you wish to cool down the temperature inside the projector quickly, select “High”.
NOTE: Select “High” if you continue to use the projector for consecutive days.
Selecting Signal Format [Input signal select]
[Computer]
Allows you to choose “RGB” for an RGB source such as a computer, or “COMPONENT” for a component video
source such as a DVD player. Normally select “RGB/COMPONENT” and the projector automatically detects a
component signal. However there may be some component signals that the projector is unable to detect. If this is
the case, select “COMPONENT”. Select “SCART” in Computer 1 for the European Scart signal.
[VIDEO & S-VIDEO system select]
This feature enables you to select composite video standards manually. Normally select “Auto”.
When you select the video standard for VIDEO and S-VIDEO, select the video standard from the pull-down menu.
This must be done for VIDEO and S-VIDEO respectively.