Filter
Top Products
1 - 24
3-3-3 Positioning in LIFT CAM SHAFT ASS’Y adjustment
(1) Remove the PRESSURE ROLLER SPRING from the hook of the chassis, and apply it to the gash
of the LIFT CAM SHAFT ASS’Y.
Figure 1-13 Positioning in LIFT CAM SHAFT ASS’Y adjustment 1
(2) Turn the gear of the LIFT CAM SHAFT ASS’Y in the direction indicated by the arrow “a” in the
photo (clockwise) until it reaches the end.
(3) Turn the gear of the LIFT CAM SHAFT ASS’Y in the direction indicated by the arrow “b” in the
photo below (counterclockwise) until it reaches the end.
Figure1-14 Positioning in LIFT CAM SHAFT ASS’Y adjustment 2
LIFT CAM SHAFT ASS’Y
PRESSURE ROLLER SPRING
b
a