Filter
Top Products
1 - 38
#8 CLEAR
#9 ROM
TEL
USER SW
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
Dialling data initialization
User data and service data #1 to #3
initialization
User data and service data #1 to #3 and
#6 to #7 initialization
#4 NCU setting data initialization
Data on system dump list initialization
Data on activity report initialization
Total number of pages printed/scanned
All user data, service data, activity
management data, and image data
initialization (except COUNTER)
(Data initialization mode
settings)
(ROM management)
Version No. and Checksum display
TEST MODE
#10 CS SET
SERVICE REPORT
1.SERVICE & SYSTEM
2.SERVICE DATA
3.SYSTEM DUNP
MAIN:V0.20
040806 0000 FA00
USB :00.00
CPU :DD-01-01-QUAD
981111 0000 FFFF
#11 DATE / TIME
1.DISPLAY
2.SETTING
Not used
Date and time display
Date and time setting
Figure 1-29 Service Data (4/4)
Caution:
If USER SW of #8 CLEAR is selected, communication management data of user data is not
deleted.
However, if TEL or SERVICE SW is selected, the communication management data of user data is
deleted.
If ALL of #8 CLEAR is performed, be sure to set #5 TYPE and turn the power OFF/ON with the
Power button (Software Power: OFF/ON). DO NOT turn the power OFF/ON by removing and
inserting the power code (Hardware Power: OFF/ON). In this case, data may not be written
correctly.
Memo:
The date/time settings at #11 DATE/TIME is equivalent to the settings at [FAX SETTINGS] –
[USER SETTINGS] – [DATE&TIME]. Neither has priority.