Filter
Top Products
Basic Copying
1
1-4
Flow of Copy Operations
[Feeder]
Staple copy: place the original with its top upward
IMPORTANT
• The copies are stapled at the part equivalent to the upper left side of the original.
NOTE
• A4, B5 and A5-size originals can be placed either vertically or horizontally. However, the scanning speed for
horizontally placed originals is somewhat slower than for vertically placed originals. You can place originals
horizontally when printing with Preset Zoom mode, such as when processing A4 → A3 .
• Horizontally placed A4, B5 and A5-size originals are referred to as A4 , B5 and A5 .
• A3 and B4-size originals must be placed horizontally.
• For instructions on placing the original, see the Reference Guide.
● If the message <ENTER DAC> is displayed
▼ Enter the Department ID and Password. (See the Reference Guide.)
NOTE
• When <AUTO SORT> is set to <ON>, the Collate or Offset Collate mode is automatically set when you place the
originals in the feeder. (See “Setting the Automatic Collate On/Off,” on p. 3-8.)
ENTER DAC
_
ABC
ABC
Vertical placement Horizontal placement
Copies are stapled here.
Copies are stapled here.
Original
(face up)
Original
(face up)