Filter
Top Products
Useful Copy Functions
2
2-12
Erasing Shadows and Frame Lines from Copies (Frame Erase)
NOTE
• You can set the book frame erase width in the range from 3 mm to 50 mm.
• The default setting is 10 mm.
• The machine selects the paper according to the original size you set in step 3 and the selected paper size is displayed.
5
Enter the desired copy quantity (1 to 99) using the numeric buttons.
For details about entering the copy quantity, see “Specifying the Required Number of Copies,” on p. 1-7.
6
Press (Start).
Copying starts.
NOTE
• To cancel all settings and return the machine to the Standard mode, press (Reset).
• If you press (Stop), the cancel job display appears. Select <YES> or <NO> using or .
• If you press (Stop) after copying has started, some sheets of blank paper may be output.
• Set the frame erase width around the original using the <2.COPY SETTINGS> menu in the Additional Functions
menu. You can set from 1 mm to 20 mm. (See “Setting the Standard Frame Erase Width,” on p. 3-7.)
Making Copies Erasing Binding Holes etc. (Binding
Erase)
1
Place your original, enter the Special Features menu, and open the <FRAME ERASE
FEATURE> menu.
For details about the procedure above, see steps 1 to 3 of “Making Copies Erasing the Frame of the
Originals (Original Frame Erase),” on p. 2-9.
100% ✱A3
TEXT
01
CANCEL COPYING?
< YES NO >
FRAME ERASE FEATURE
1.DOC. FRAME ERASE