Filter
Top Products
Settings Menu
3-5
3
Printer Settings Menu Functions and Operation
Default Paper
Type
Plain Paper, Transparency, Heavy Paper, Recycled, Color,
Letterhead, Tracing Paper, Labels, Bond Paper, Envelope
This parameter sets the default paper type to be used for print job. This
printer has internally defined optimal print modes for each specified paper
type.
IMPORTANT
•
If you are printing from an OS that does not have a printer
driver for the machine (MS-DOS, UNIX, etc.) make sure
that the paper loaded in the paper drawer matches the
paper type specified in this setting. If the paper type
specified in this setting is not available, an error message
will be displayed when the machine tries to print the job
and the machine will stop. In addition, if a paper source
has not been selected through the application, the
machine will automatically select default print settings for
the paper type and size. See “Setting a Paper Drawer for
Auto Paper Selection/Auto Drawer Switching,” in the
Reference Guide.
NOTE
•
Use the following figures as a guideline to decide whether
paper should be specified as Plain Paper or Heavy Paper.
- Plain Paper: 64 gsm - 90 gsm (64 g/m
2
- 90 g/m
2
)
- Heavy Paper: Paper heavier than Plain Paper -
128 gsm (128 g/m
2
)
•
Canon transparency film is recommended for printing on
transparencies.
•
Canon label paper is recommended for printing on labels.
•
Transparency, Tracing Paper, and Labels cannot be
printed using two-sided printing.
Paper Size
Override
On, Off
When paper of the size that is set in the printer driver has not been loaded
in the paper drawer, the paper that is printed will be changed to the
following sizes.
If [On] is selected, the paper size will be changed.
If [Off] is selected, the paper supply message will be displayed and the
paper size will not be changed.
Printer driver setting Paper that will be printed on
A4 → Letter
Letter → A4
A3 → 11x17
11x17 → A3
iR33/28/22RG.book Page 5 Thursday, May 10, 2001 5:27 PM