Filter
Top Products
Printing Problems
5-5
5
Troubleshooting
Printing Problems
If you have trouble printing, we recommend dealing with the problems in the
following ways.
NOTE
•
Please contact your Canon service representative if a problem persists, or if you
encounter problems not listed below.
Printer Trouble
The printer does not work
Printing stops before the job is complete
You cannot stop the print job
Cause 1
There is data remaining in the printer’s memory (The Processing/Data lamp is flashing
or lit.)
Solution
Print out the data.
Reference
See “Operating Print Jobs Sent from a Computer,” in the Reference Guide.
Cause 2
There is a problem with the printer or the software.
Solution
Look at the message on the display and act accordingly.
Reference
See “When a Message Is Displayed,” on p. 5-3.
Cause
There is data remaining in the printer’s memory (The Processing/Data lamp is flashing
or lit.)
Solution
Print out the data.
Reference
See “Operating Print Jobs Sent from a Computer,” in the Reference Guide.
Cause
The print job is too large to be stopped.
Solution
Restart any jobs that have been suspended by performing an error skip.
iR33/28/22RG.book Page 5 Thursday, May 10, 2001 5:27 PM