Filter
Top Products
ix
❏
The printer should never be placed near or over a radiator, heat
register, or flame. It should not be placed in a built-in installation
unless proper ventilation is provided.
❏
Before connecting the printer to a power source, check the voltage
rating label at the back of the printer to ensure that the printer voltage
matches that of the power source. The voltage rating label is located
on the rear side of the printer. If the voltage label is missing, contact
your nearest authorized dealer or the place of purchase.
❏
The power cord should be routed so that it is not likely to be walked
on or pinched by items placed on or against it. Pay particular attention
to the plug, the power socket, and the point where the cord exits the
unit.
❏
Keep the power cord and cables away from children.
❏
Do not handle plugs with wet hands.
❏
When the printer will not be used for a long period, turn the power off
and unplug the power cord for safety.
❏
Unplug the printer from the wall outlet before cleaning. Do not spray
liquid cleaners or aerosol cleaners directly on the cabinet or the
openings, as the spray could penetrate inside the printer and
contaminate internal parts. Use a damp cloth for cleaning.
❏
Never push objects of any kind into the printer through openings in the
enclosure, as the objects might touch dangerous voltage points or short
out parts. This could result in a fire or electrical shock. Never spill
liquid of any kind into the printer.
❏
Unplug the printer and request servicing from qualified service
personnel in the following situations:
• When the power cord or plug is damaged or becomes frayed.
• If liquid is spilled into the printer.
• If the printer is exposed to water.
Ventilation slots