Filter
Top Products
59
The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.
The horizontal frequency of the input signal is
displayed in , or when no signal.
The vertical frequency of the input signal is
displayed in , or when no signal.
Numbers of Hz doubles when during Interlace.
The cumulative lamp operating time is displayed.
Press the INFO. button on the remote controller
to display the Information Menu.
Press the Point ▲▼ buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
, or , and are displayed.
The selected Screen size is displayed.
The selected input source is displayed.
The selected lamp mode is displayed.
Language
The selected language is displayed.
The selected Key lock icon is displayed.
or On 1 or On 2 is displayed.
The selected remote code is displayed.
Direct Operation
Menu Operation
The serial number of the projector is displayed.
The serial number is used to service the
projector.
The saved amount of power and the exhausted
CO2 are displayed.