Canon LV-8225 Projector User Manual


 
31




This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment.
If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to
project a proper image without any additional settings. (Signal formats provided in this projector are shown on page
76.)
One of the following messages may appear when:
When the projector cannot recognize
the connected signal conforming to the
provided PC systems,  is displayed
on the System Menu box and the Auto
PC Adjustment function works to display
proper images. If the image is not projected
properly, a manual adjustment is required
(pp. 33-34).
There is no signal input from the
computer. Check the connection between
your computer and the projector. (See
“Troubleshooting” on p. 71.)


The preset system is manually adjusted in
the PC adjust Menu. The adjusted data can
be stored in  (pp. 33-34).

PC Systems provided in this projector is
chosen. The projector chooses a proper
system provided in the projector and
displays it.

* and  are examples.
1
2
PC system can also be selected manually.
Selecting Computer System Manually
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select 
and then press the Point or the OK button.
Use the Point ▲▼ buttons to select  and
then press the Point or the OK button.
Use the Point ▲▼ buttons to select the desired
system and then press the OK button.
3
Selected system in
the PC System Menu
is displayed.
Systems in this dialog box
can be selected.
Customized 
 set in the PC
adjust Menu (pp.
33-34).