Filter
Top Products
7
– Remove the batteries when they have been
exhausted or not in use for an extended period of
time.
– Be sure to replace both batteries at the same
time. Do not mix batteries of different types.
– Insert batteries correctly according to the “+” and
“-“ markings.
– If a fluid from a battery leaks and comes in
contact with your skin, rinse the affected skin
thoroughly as soon as possible.
– Do not place heavy objects or step on the
projector. Be especially careful that small children
do not step on the projector. If not, the projector
may drop or break, causing injury.
– Disconnect the power cord from the power outlet
if the projector is left unused for a long period of
time. Failure to do so may result in a fire.
– Do not bring your hands to the peripheral part
of the exhaust vent on the cabinet. This area
becomes hot during use. Be especially careful
that small children do not touch the area. Failure
to do so may result in burn.
– Do not put metal objects in front of or near
the exhaust vent. They will become hot while
projector is being used.
– Do not place the projector on top of unstable or
slanted surfaces. The projector may fall down
and cause injury.
– Do not attach the lens cover while the projector
is being used or place any objects in front of the
lens. Failure to do so may result in a fire.
– A buildup of dust inside the projector can cause a
fire or damage. Consult your dealer for cleaning.
– When installing the projector to a ceiling, consult
your electrician or dealer. If the projector is not
fixed securely, accidents may result.
– Never take out the lamp soon after the projector
is used. Let the projector cool for at least 1 hour
before taking out the lamp, as burns may result.
– If the lamp replacement icon appears or the
LAMP REPLACE indicator lights orange,
immediately replace the lamp with a new one.
Otherwise, the lamp may burst.
– If the lamp burns out, the gas or dust (containing
mercury) inside the lamp may escape from the
air vents. Immediately open the windows and
ventilate the room. If you inhale the gas or the
gas gets into your eyes or mouth, see a doctor at
once.
– Dispose of a lamp containing mercury in the
same manner as fluorescent lamps according to
local regulations.
– This projector is a precision machine. Do
not subject the projector to strong shocks or
vibrations or knock it down. Remove the lens,
close the lens mounting hole with the front cover,
and retract the adjustable feet before placing the
projector into the carrying case. The projector
may be damaged if you place it in the case
without retracting the adjustable feet.
– Place the projector into the specified case
when transporting it by courier or any other
transportation service. Consult your dealer for the
case.
– Keep space of 1 m or more at the sides of the
projector between the intake/exhaust vents and
walls. Poor ventilation may cause malfunction.
– Do not install the projector in the locations
with heavy dust, high humidity, oily vapors, or
cigarette smoke.
A buildup of dust on the optical elements such as
lens or mirror may degrade image quality.
– Directly touching the lens may cause poor image
quality.
– If the projector is carried from a cold place to a
warm place or the room temperature is raised
rapidly, condensation may form on the lens and
mirror due to the moisture in the atmosphere,
resulting in a blurred picture. Wait until
condensation evaporates and normal picture is
shown.
– Do not install the projector in the locations with
great difference in temperature. Doing so may
cause malfunction. The ranges of the operating
and storage temperatures are as shown below:
Operating temperature: 41˚F–95˚F [5˚C–35˚C]
Storage temperature: 10˚F–140˚F (-10˚C–60˚C)
– Do not install the projector near high-voltage
electric power lines or power sources.
– Do not place the projector on a carpet or bed.
The internal temperature will rise, causing
malfunction.
– To avoid increase in the internal temperature, do
not block the intake/exhaust vents.
– Position the projector at a proper angle. Incorrect
positioning may cause troubles and accidents. Do
not roll the projector more than 20 degrees from
the horizontal.
– Do not place any heat-sensitive objects on the
projector.