Filter
Top Products
Chapter 1 15
Before Printing
Setting Documents
Document Requirements
The documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Loading Documents
To copy or scan a document, set it on the Platen Glass.
1 Lift the Document Cover.
2 Load your document.
z Place your document face down on the Platen Glass.
z Align the upper left corner of your document with the alignment mark on the lower right
corner of the Platen Glass.
Document Type
z All types of paper documents
z Photographs
z Books, catalogs or magazines
Size (W x L)
Max. 8 1/2 in. x 11 3/4 in. (216 mm x 297 mm)
Thickness
Max. 3/4 in. (20 mm)
Note
Make sure any glue, ink, or correction fluid on the document is completely
dry before loading.
Important
z Do not place any objects weighing more than 4.4 lb / 2 kg on the
Platen Glass.
z Do not press or put weight on the original with pressure exceeding 4.4
lb / 2 kg.
Doing so may cause the scanner to malfunction or the Platen Glass to
break.
Note
The machine cannot scan the area within approximately 1/16 in. (2 mm)
of the front and right edges of the Platen Glass.