Filter
Top Products
139
Network Settings on the Projector
Installation Manual Connecting to a Networ
k
Registering a Network Pass-
word
[Register Network Password]
Register the projector network password.
When [Register Network Password] is
selected, the window shown below
appears. Press the [], [], [] / [] but-
tons in any combination and enter the 4-
digit password.
Press the OK button to accept your setting
and then press the MENU button.
• The factory default is [ ] [ ] [ ] [ ].
Turning On / Off the PJLink
Function
[PJLink]
You can turn the PJLink network function
on and off. When the function is turned on,
control is possible via the LAN using com-
mands that meet PJLink standards.
Press the OK button to accept your setting
and then press the MENU button.
• [On] is the factory default.
• This projector conforms to Class 1 as
defined in the PJLink standards of the
JBMIA (Japan Business Machine and
Information System Industries Associa-
tion). This projector supports all com-
mands that are defined by PJLink Class 1,
and has been verified as conforming to the
PJLink standard Class 1 definition.
• For information about using PJLink, refer to
“Setting PJLink” (P152).
Network Setting
Register Network Password
Off Disables the PJLink function.
On Enables the PJLink function.
PJLink
Network Setting