Filter
Top Products
15
1.3.4 DT-169CHGE Cradle-type Battery Charger
The following external views show the DT-169CHGE (Cradle-type Battery Charger). Refer to Table
1.6 for each referenced part on the DT-169CHGE.
Views
Back
Top
Front
Right Bottom
1
2
3
4
6
7
5
Fig 1.2
Table 1.6 Names of parts
No. Name Description
1 AC Adaptor Jack Connects the AC adaptor here.
2 Wall Mount Unit
Fastening Plate
The holes in this plate accept screws that secure the wall mount unit in place.
3 Terminal Detect
Switch
This switch detects when the Handled Terminal is not seated correctly on the
Cradle.
4 Power Contact Power is supplied to the Handheld Terminal via these contacts.
This lamp indicates the power status and the mounting status of the Handheld
Terminal.
Off : Power off
Red : Power on, Handheld Terminal not mounted
5 Power Indicator
Lamp
Green : Power on, Handheld Terminal mounted correctly
6 Power Switch Turns the power on and off.
7 Desktop Unit This is the base when using the Cradle in a desktop configuration. Remove the
desktop unit in the case of a wall mount configuration.