Filter
Top Products
22
2.3 DT-167CHGE Car Mounted Battery Charger
Table 2.4
Item Specification Remark
No. of LEDs 1
No. of display colors 2 In red and green
Display content Power status (“POWER”)
Indicates the status of terminal being mounted on the charger.
Display Status LED
OFF
Flashing in green
Flashing in red
: Power is OFF.
: Power is ON and the terminal is mounted on the
charger.
: Power is ON but the terminal is not mounted on the
charger.
Input Detection switch for DT-X11 terminal Push switch
Input voltage
DC 12V/24V±5%
DC 12V: Approx. 1,400 mA Consumption current
DC 24V: Approx. 700 mA
While supplying
power.
Plug EIAJ RC-5320A Class 4 Center: plus
Input from
power
adaptor
Power cord DT-827CAC
Output voltage
DC 5V±10%
Output current 2,500 mA (maximum)
Charge method Constant voltage With curb
function on
current
Approx. 2.5 hours For HA-A20BATCharge time
Approx. 5.0 hours For
DT-5025LBAT
Power
Charge/suppl
y power
Power supply
terminals
Power
supply
terminals
GND
The illustration of
the power supply
terminals on the
left is viewed at
the front of the
charger.
Table 2.5 Weight/Dimensions
Specification Remark
Weight Approx. 755 g
Dimensions Approx. 119 (W) x 267 (D) x 123 (H) mm