Filter
Top Products
18
Laser Scanner (DT-X11M10E and DT-X11M10RC)
Method Semi-conductor laser light
Laser emitting angle Straight
Wave length 650±10 nm
Optical output <1 mW
No. of scannings 100±20 times per second
Resolution 0.127 mm (minimum)
PCS 0.45 (minimum) Print contrast signal
Readable distance Approximately 40 to 300 mm
Max. 40 mm When the distance is at 40 mm.Readable width
Max. 238 mm When the distance is at 300
mm.
Daylight for scanning 50,000 Lux or less
Readable 1D bar code
symbologies
EAN8/JAN8, EAN13/JAN13, UPCA,
UPCE, Code39, Codabar(NW7), Interleaved
2of5(ITF), Code93, Code128(EAN128),
MSI(Plessey), IATA, Industrial 2of5(IDF),
RSS-14, RSS Limited,
RSS Expanded
Display
Display device 3.5-inch 2-Way TFT color LCD
No. of dots 240 (h) x 320 (w)
Dot pitch 0.22 (h) x 0.22 (w) mm
Display font Scalable font See note 1
Backlight LED
Indicator
Confirmation /Status LED x 2 pcs in red/green Left: Programmable
Right: Battery charge status
Input
Keyboard Numeric (Alphabet) keys, CLR key, Execute
key, Fn key, Text key, Cursor key
Control keys Power ON/OFF key, Reset switch
Trigger keys 2 keys ( on the left and right sides)
Touch panel Plastic panel (Resolution 240 x 320)
Possible to display character input pad
IrDA interface
Standard IrDA ver.1.1 compatible
Communication
process
Half duplex
Synchronization Start/Stop bits
Baud rate (in bps) 9,600/115,200/4M
Communication range 0 (contact) to 1m Max. 0.25m at 4Mbps
Continue.