Filter
Top Products
E-16
5. Press SET to recall the text from the area that
is currently on the display.
• Note that recalling data from memory replaces
anything that is currently on the input display.
Memory text cannot be appended.
To delete text from memory
1. While the input screen is on the display, press FUNCTION and then 1
(MEMO).
2. Press L a number of times to change to the
text delete prompt.
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
4. Use K and L to select Area 1 or Area 2 then
press SET.
5. Press SET to delete the text from the area that is currently on the display.
4. Press SET to store the text in memory or ESC
to abort the store procedure without storing
anything.
• If there is nothing in memory yet, your text is
automatically stored in Area 1. If Area 1 already
contains data, your new input is automatically
stored in Area 2.
• If there is not enough room for your text to fit in
memory, the message “FUL!” appears when you
press SET in step 4.
To recall text from memory
Example: To recall the contents of Area 2 while memory contains the following
text.
Area 1: ABCDEFG
Area 2: CASIO
1. While the input screen is on the display, press FUNCTION and then 1
(MEMO).
• Note that text recalled from memory will replace any text currently on the
display.
2. Press L a number of times to change to the
text recall prompt.
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
4. Press L to change to Area 2.
• Use K and L to switch between Area 1 and
Area 2.
CAL?
ABCD
CASI
Area 2 text
Area 1 text
CASI
ABCD
Area 1 text
OK?
DEL?
OK
EFG