P-49
QT-2100 Programming Manual
4-1-5-8 Programming the communication
Operation
5. Select “8. Communication” and press the <YES> key.
6. Select the field you want to change and press the <YES>/
<NO> key or enter the numeric value and press the <YES>
key.
7. After programming, you should press the <ESC> key to
return to the previous menu.
Field meaning
1. Copy program change to other terminals:
Broadcast the programmed data in PGM 1 ~ 4 mode after completion of a program.
2. Origin of reset data to be sent to the master:
You can choose “Own data file” or “Consolidation file.”
3. Stock result copy:
Copy stock quantity to master daily file after Z consolidation.
General Feature
General Feature
1.Machine Control1
2.Machine Control2
3.Machine Control3
4.Machine Control4
5.Print Control
6.Report Control1
7.Report Control2
8.Communiction v
0.00
Communication
Copy program change to other
terminals NO
Retry INLINE X/Z Polling YES
Allow to operate communication
function YES
Origin of reset data to be
sent to the master Own data file
Reset&Printing of consolida-
tion file before reset report Print
Master printing of consolida-
tion reset report Printv
0.00
Communication
sent to the master Own data file^
Reset&Printing of consolida-
tion file before reset report Print
Master printing of consolida-
tion reset report Print
Reset consolidation total
after inline consolidation YES
Stock Result Copy NO
Accumulation of data in consoli-
dation area following RESET
operation YES
0.00
