9
Part-1
E
QUICK START OPERATION
Part-1
1. Initialization and loading memory protection battery
Important
You must initialize
the cash register
and install the
memory protection
batteries before you
can program the
cash register.
◗ To initialize the cash register
1. Set the mode switch to OFF.
2. Plug the power cord of the cash register into an AC outlet.
3. Load the memory protection batteries.
4. Set the mode switch to REG.
◗ To load the memory protection batteries
1. Remove the printer cover.
2. Press down on the oval just behind the printer paper inlet, and slide the battery
compartment cover toward the back of the cash register.
3. Load 3 new UM-3, R6P (SUM-3) or LR6 (AM-3) type batteries into the compartment.
Be sure that the plus (+) and minus (–) ends of each battery are facing in the
directions indicated by the illustrations inside the battery compartment (Figure 1).
4. Slide the memory protection battery compartment cover back into place.
5. Replace the printer paper and printer cover.
REPLACE MEMORY PROTECTION BATTERIES AT LEAST ONCE
EVERY YEAR.
(Figure 1)
2. To select the language
You can select the default printing language depending on the requirements in your area.
Example: Change the language to Spanish.
1. Set the mode switch to PGM.
2. Press the following keys.
3. To select date format and monetary mode
You can select t the date format and the monetary mode.
Example: Change the date format to Month/Day/Year, and the monetary mode to Add 0.
1. Set the mode switch to PGM.
2. Press the following keys.
Program set code number
P3 appears in mode display
Select numbers from
lists B and C.
(To end the setting)
Co
?ZXXo
Z?p
o
Language selections
A
English Z>>>
Spanish X>>>
French C>>>
German V>>>
Date format selections
B
Year/Month/Day ?
Month/Day/Year Z
Day/Month/Year X
Monetary mode selections
C
Add 0 (0. ) ?
Add 1 (0.0 ) Z
Add 2 (0.00 ) X
Select numbers from list A.
X>>>{
▲
▲