Filter
Top Products
14
Getting Started
E
Programming automatic tax calculation
Important!
After you program the tax calculations, you also have to individually specify which departments
(page 33) and PLUs (page 35) are to be taxed.
For this cash register to be able to automatically register state sales tax, you must program its tax tables with
tax calculation data from the tax table for your state. There are three tax tables (U. S.) and four tax tables
(Canada) that you can program for automatic calculation of three/four separate sales taxes.
Programming for the U.S. tax tables procedure
There are two ways to set up the U.S. tax tables:
A) Input the desired tax rate / Changing the tax rate
/ 2 2/ 2 0101/
8. Tax table programming
02:HOW TO PROGRAM
TAX TABLE?
•SELECT YOUR STATE AND
ENTER NUMBER THEN
PRESS <HELP> KEY.
0101:ALABAMA
0201:ALASKA
0301:ARIZONA
0401:ARKANSAS
0501:CALIFORNIA
:
:
5001:WISCONSIN
5101:WYOMING
Follow these steps.
PLEASE SELECT YOUR
DISTRICT NUMBER FOR TAx
TABLE 1 (XXXX) AND TABLE
2 (YYYY) FROM BELOW
TABLE.
1)TURN MODE KEY TO PGM.
2)3<SUBTOTAL>
3)0025<SUBTOTAL>
4)XXXX <CASH> KEY.
5)YYYY <CASH> KEY.
(IF YOU DO NOT NEED
TABLE 2, JUST SKIP
STEP 5)
6)<SUBTOTAL>
XXXX, YYYY IS DISTRICT
NUMBER
ALABAMA
0101: 4% State
0102: 4.5% State & Local
:
0111: 9 % State & Local
(Alabama)
ENTER NUMBER THEN
PRESS <HELP> KEY.
01:HOW TO PROGRAM
DATE AND TIME?
02:HOW TO PROGRAM
TAX TABLE? (US)
:
:
B) Choose the tax rate from a preset tax table.
The procedure to setup the tax table is printed on the guidance receipt. First issue the guidance receitpt by
the / key and follow it to set the tax table.
63s 61 6 ~ 6 12^34 6a6
6
::;: 6 a 6 s
Tax table No.
Tax table 1: 1
Tax table 2: 2
Tax table 3: 3
Tax rate
6.25%:
6^25
7%: 7
Rounding
Round off: 50
Cut off: 00
Round up: 90
Tax system
Add-on: 2
Add-in: 3
D
4
D
3
D
1
Skip to set “Round off / Add-on”.
Mode Switch
X
REG
OFF
RF
PGM
Z
X2/Z2
PGM