Filter
Top Products
66
Part VII
DSP Parameter List
This list shows the parameters for each of the DSP
algorithms.
U0 to U7 indicate User Parameters 0 to 7, while I00 to I15
indicate Internal Parameters 00 to 15.
Parameters for which no setting range is indicated, receipt
of a value from 0 to 127 is assigned as-is to the parameter.
40 DSP Algorithm List
(Single Effect)
These are effects that are configured of a single
module.
40.1 Algorithm 00 (00H) : Auto Pan
40.2 Algorithm 01 (01H) : Tremolo
40.3 Algorithm 02 (02H) : 2BandEQ
Note 1:See "42.12 Equalizer Low Frequency Setting
Value Table".
Note 2:See "42.15 Equalizer Gain Setting Value Table".
Note 3:See "42.14 Equalizer High Frequency Setting
Value Table".
40.4 Algorithm 03 (03H) : 3BandEQ
Note 1:See "42.12 Equalizer Low Frequency Setting
Value Table".
Note 2:See "42.15 Equalizer Gain Setting Value Table".
Note 3:See "42.13 Equalizer Mid Frequency Setting
Value Table ".
Note 4:See "42.15 Equalizer Gain Setting Value Table".
Note 5:See "42.14 Equalizer High Frequency Setting
Value Table ".
Note 6:See "42.15 Equalizer Gain Setting Value Table".
40.5 Algorithm 04 (04H) : LFO Wah
40.6 Algorithm 05 (05H) : Auto Wah
Note 1:See the "42.5 -64 to 0 to 63 Setting Value
Table."
Number Parameter Notes
U0 Rate -
U1 Depth -
Number Parameter Notes
U0 Rate -
U1 Depth -
Number Parameter Notes
U0 Low Frequency Note 1
U1 Low Gain Note 2
U2 Hi Frequency Note 3
U3 Hi Gain Note 2
Number Parameter Notes
U0 Low Frequency Note 1
U1 Low Gain Note 2
U2 Mid Frequency Note 3
U3 Mid Gain Note 4
U4 High Frequency Note 5
U5 High Gain Note 6
Number Parameter Notes
U0 Input Level -
U1 Resonance -
U2 Manual -
U3 LFO Rate -
U4 LFO Depth -
Number Parameter Notes
U0 Input Level -
U1 Resonance -
U2 Manual -
U3 Depth Note 1
I00 Sensitivity -