Filter
Top Products
55
Configuring YC Camera Application Setup Menu Settings
You can use the YC Camera setup menu to configure various YC Camera application
operation settings.
To configure YC Camera application setup menu settings
1
Press the [MENU] key to display the setup menu.
2
Press the [T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3
Press the [T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the YC Camera application setup menu.
4
Use [T] and [S] to select the menu item whose setting you want to change.
5
Press the [W] or [X] key to select the setting you want (so its button is ).
6
Repeat steps 4 and 5 to configure other settings, if you want.
7
After you are finished, press the [ESC] key to exit the setup menu.
Note
Anytime you change the “White Enhancement” or “Skew Correction” setting, the new
setting goes into effect from the next image you record with the document camera after
exiting the setup menu. Other settings go into effect as soon as you exit the setup
menu.