Filter
Top Products
56
To restore all settings on the YC Camera application setup menu to their
initial factory defaults
1
Press the [MENU] key to display the setup menu.
2
Press the [T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3
Press the [T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the YC Camera application setup menu.
4
Press the [T] key to move the highlighting to “Initialize YC Camera Setup” and
then press the [ENTER] key.
z This displays the dialog box shown below.
5
Use the [S] key to select “Yes”.
6
To restore all the settings to their initial defaults, press the [ENTER] key.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
7
After you are finished, press the [ESC] key to exit the setup menu.