Casio XJ-ST145 Projector User Manual


 
11
As shown in the figure below, connect the wireless adapter that comes with the projector to its USB
port.
Important!
z Keep the wireless adapter in a safe place when it is not connected to the projector.
z Never try to use the wireless adapter that comes with the projector with any other type of
device.
Note
What happens when you connect a USB device while the projector is turned on depends on the
projector’s current plug-and-play setting, which is enabled under initial default settings.
z If you connect the wireless adapter to the projector while plug-and-play is enabled (On), the
projector will automatically start up its Wireless application (page 13) and project the wireless
standby screen.
z If you connect the wireless adapter to the projector while plug-and-play is disabled (Off), the
projected screen will not change but its Wireless application will start running in the
background. In this case you need to use the [INPUT] key to change the input source to “USB”
in order to display the wireless projection screen.
For more details about the projector’s plug-and-play setting, see “Setup Menu Contents” in the
User’s Guide on the CD-ROM that comes wit the projector.
Connecting the Wireless Adapter
*
Caution
Keep the wireless adapter that comes with the projector out of the reach of
small children. Accidental swallowing of the product can interfere with proper
breathing and create a life-threatening situation.